Xiaomi MiBand 6 Watch Charging Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging stand for Xiaomi Mi Band 5/6/7. Printable with extra weight for extra stability
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Xiaomi Mi Band 5/6/7 Charging Stand
A practical charging stand for the Xiaomi Mi Band 5, 6, and 7.
This model is designed to hold your Mi Band securely and keep the charging cable in place, making it easy and convenient to charge your device.
Printing Information:
The model can be printed on its side for optimal strength and print quality.
By using a layer pause, you can add weight to the slots during printing — for example, 6 M10 nuts.
This will make the stand more stable and prevent it from sliding around during use.
Recommended Settings:
Material: PLA or PETG
Infill: 15–20%
Layer height: 0.2 mm
No supports required
Tip:
Print at a moderate speed for the best surface finish, especially near the top of the stand.