1 / 2
Xiaomi Roborock S5/S50 animal ornaments — zdjęcie 1
1 / 2

Xiaomi Roborock S5/S50 animal ornaments

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Roborock Lidar tower ornaments

Ocena
0 / 5
Polubienia
9
Pobrania
27
Wydruki
0
Wyświetlenia
378
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Cat companions for your Roborock S5! 
(also known as S50)

For those who don't have a real cat to drive around on top of their robot vacuum.

Prints in several parts, for easier prints, no supports required. There is a base, a threaded connector which screws into base and animal top part, and the animal.

Animals are a remix of the excellent low-poly animals by @MatthiasL with an added threaded hole for connection.

 

  • print the base
  • print the connector
  • print one animal
  • screw the connector into the base
  • screw the animal on top of it
  • set the whole thing onto the robot lidar tower (sits somewhat loose to avoid breakage when running into something too low)

 

It adds a bit of height to the overall bot height, so if you park it somewhere or rely on it to go under low furniture, check these:

  • sitting cat: ca 6.5cm
  • sleeping cat: ca 3.5cm

Tagi