1 / 2
Honda Africa Twin - Dash Bar GoPro Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple GoPro mount for the 13mm bar on top of the dash.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Simple mount made out of two pieces. A piece of rubber (cut from an inner tube) wrapped on the bar where it mounts, helps with vibrations. It should also fit on the CamelAdv or similar Aliexpress braces for the Africa Twin.
Important: the half with the GoPro mount should be printed on either small side with supports. Much stronger like this. The back half can be printed with the large area on the print bed.
Needs 4x M4 bolts and nuts.