1 / 3
BetaFPV Lava 550mah protector cage and air65 adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder and cage for bigger 1S lipo batteries for tiny whoops. I suggest printing it out of TPU, PETG or ABS
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 175
- Wydruki
- 0
- Wyświetlenia
- 1252
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (37)Powiązane
This is a 1s Lipo cage and adapter for tiny whoops, its meant to be inserted in the 11mm battery holder to use bigger 550mah lava batteries, it also protects the batteries from being smashed if you crash. it weights roughly 3.4g.
Print settings are standard 0.2mm layer height 0.4 line width , and i suggest printing it out of TPU, PETG or ABS, for a nice snug fit.
(It also works with the case)
