1 / 5
CORE One Enclosed MMU3 rubber dampened mount (Big noise reduction on loading / unloading) — zdjęcie 1
1 / 5

CORE One Enclosed MMU3 rubber dampened mount (Big noise reduction on loading / unloading)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I redisigned the original mount to accept rubber dampers

Ocena
5 / 5
Polubienia
6
Pobrania
13
Wydruki
0
Wyświetlenia
324
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

I noticed while testing an mmu that while it was not mounted it made way less noise.

So….

I designed an rubber dampened mmu3 mount. 

Buy 4 M3 damper rubber. One side with at least 8mm thread (mmu side) and the other m3 screw hole. Otherwise mounting is impossible.

Hand tighten the rubbers (very hard) on the mmu. M3 bolt side first and then screw on holder with one original m3x10 (front) and one countersunk m3 (cut to 3mm length) rear screws.

Two versions. I suggest the 1.5mm to the front version otherwise with an litle rubber sag or tension of the ptfes the mmu hits the plate.

 

Rubber: https://www.amazon.nl/Rubber-Mounts-Vibration-Silentblock-Bobbins/dp/B08FC8ZSHV?th=1

https://amzn.eu/d/d0xvXzo