Spitfire Shell – Spring-Powered 40max 98% 3D printed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spitfire Spring-Powered Nerf Shell is a fully 3D printable upgrade compatible with 40MAX blasters. No gas or rubber band
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Spitfire Spring-Powered Nerf Shell is a fully 3D printable upgrade compatible with 40MAX blasters. No gas or rubber bands needed — just print, assemble, and add a common spring for reliable, powerful performance. Easy to print and assemble, this design offers a durable and fun mod for Nerf enthusiasts. Use responsibly — do not aim at people or animals. The designer is not liable for any damage or injury resulting from misuse. https://youtu.be/bEucgPaS9To https://youtube.com/shorts/iNrx_C-okCw
Recommended to print with supports. Best results achieved using PLA Pro or PETG. Use a layer height of 0.2 mm and 20–30% infill for durability. Required spring: 5 kg force, wire diameter 1.5 mm, coil radius 25 mm, height 90 mm. Build guide: Assemble printed parts as shown in the reference images. Insert the spring carefully — one end may need to be slightly bent to fit securely into the designated hole. Make sure all parts move freely before use. No glue is required. https://youtu.be/bEucgPaS9To https://youtube.com/shorts/iNrx_C-okCw