Bigscreen Beyond Babble / Vive Face Tracker Mount Clip on Style (FDM friendly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Face tracker mount for bigscreen beyond 1 or 2. Works with standard mounting used for most babble or vive face trackers.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 719
- Wydruki
- 0
- Wyświetlenia
- 2234
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation platform. These models are only listed here on printables, for free, for you to print or use a print service like PCBway or JLCPCB, or your friends.)
A clip-on (no glue required) version of the vive/babble tracker mount designed for FDM printers.
You will need
M3 x 20mm bolt (socket head cap screw)
M3 nut
Update: added a version that uses the original vive face tracker screw.
Update 2: added a version that is much longer for longer focal length cameras.
Update 3: added a version that is much shorter for wide angle cameras.
Update 4: added a version that is positioned more optimized for the babble algorithm.
Update 5: added step for remixes