[Parametric] Lovesac Sactional - Square Side - Top Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A side table to fit on top of Lovesac Sactional square sides.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Standard Digital File License
This customizable side table for Lovesac Sactionals is designed to slide onto a square side to provide a more stable flat surface and protect your Sactional cover.
STL, SCAD, and 3mf files provided. No supports necessary for printing.
The model is parametric, so you can adjust it to fit your needs using OpenSCAD or a similar program:
- Table Options
- table length (180mm default): This is the length of the table along the side.
- rim height (10mm default): This is the height of the rim around the table top; set to 0 if you want a perfectly flat top. This also controls the rim slope into the inset, as that's at a 45-degree angle.
- rim thickness (5mm default): This is the width of the rim.
- table thickness (5mm default): This is the thickness of the table that sits above the Sactional side.
- corner rounding radius (2mm default): This is the radius to which to round the outside lines at the top and bottom of the support legs; set to 0 for no rounding.
- Leg Options
- support height (100mm default): This is the length of the support legs that extend below the table to hug the Sactional side.
- support thickness (10.5mm default): This is the thickness of the support legs. The default of 10.5mm maximizes the thickness that can fit on an A1 Mini.
I recommend using a coaster for hot drinks, especially if printing in PLA.
Drop a comment if you need a specific configuration uploaded as a print profile so you can print directly from Printables.
All models uploaded to Printables are uploaded with a free Personal Use License. Commercial Use Licenses are available to Supporters/Distributors on Patreon.