Zelda BOTW Guardian Toy Sword
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple toy sword designed from The Legend of Zelda - Breath of the Wild game.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 861
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
My kids wanted to have a guardian sword from the game, so I created a simple replica. Built of two major pieces - a blade and a handle that slides together and can also be secured using a M4x20 countersunk screw with nut, or similar size tapping screw. There is also two pieces of inlays that can be printed in a different color, adding a nice trim effect.
Printing instructions:
Can be scaled to fit print bed, down to 80% is tested and working with M3 screw and nut. Smaller is printed at you own risk.
Print bottom/top layer with hilbert curve pattern for greater visual effect.
Supplied STL files are orientated in the best way to be printed.
| Material | PLA or PETG |
|---|---|
| Nozzle Diameter | 0.4mm |
| Layer Height | 0.2mm |
| Perimeter / Wall Count | 2 or more |
| Infill Type | Any |
| Infill Percentage | > 40% |
| Support | Only for alignment pin on handle |