1 / 4
uConsole Light Armor - Hackergadgets Antenna board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
updated version of my ClockworkPi uConsole Light Armor, designed to snugly house the Hackergadgets antenna module
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 246
- Wydruki
- 0
- Wyświetlenia
- 1509
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (51)Powiązane
This is an updated version of my ClockworkPi uConsole Light Armor, now designed to snugly house the Hackergadgets uConsole RTL-SDR/LoRa/GPS/RTC/USB Hub All-In-One Extension Board.
(Link: hackergadgets.com/products/uconsole-rtl-sdr-lora-gps-rtc-usb-hub-all-in-one-extension-board?variant=46418965069998)
What’s New:
- Custom Antenna Housing: A dedicated enclosure on top of the uConsole to securely hold the extension board and its antennas, with the SMA connectors properly accessible for easy antenna connections.
- Fixed Sun Hood: Replaces the previous lid to provide constant sun protection and screen shade without hindering use.
- Revised Stand Design: The new rear support has been slightly reshaped to accommodate the extra thickness from the antenna housing, preserving the device’s balance and angle.
Retained Features:
- Full access to all uConsole buttons, ports, and slots.
- Reinforced edges and side guards for field durability.
- Screen visibility and control remain clean and ergonomic.
- lanyard for attaching a camera strap
Print Specs:
- Material: PLA+ or PETG highly recommended for durability and weather resistance.
- Supports: Required for the overhangs of the hood and antenna area.
- Wall thickness / perimeters: 4+ perimeters suggested for strength.