Hexagonal Lazy Susan with LEGO DUPLO-Compatible Top Plate

This model is a hexagonal Lazy Susan, specially designed for children who enjoy building with LEGO DUPLO.

Hexagonal, equipped with a 129-stud DUPLO-compatible grid.
The rotating plate allows kids to build on top and easily turn their creations for play or presentation.

Printing information

The STL files are correctly aligned.

Layer height: 0.2 mm
Perimeter: 2
Infill: for "Bottom" and “Top” 10%; for “Carrier” and “Pins Set” 0%
Support: no

The plate is printed lying flat with the studs facing down. This means that initially 129 small stud bases are printed separately, and only at layer #25 (~5 mm height) they get connected by bridging.

— — — A perfectly clean print bed is therefore essential. — — — 

If you are concerned about bed adhesion, you may use a brim.
Personally, I recommend 3DLAC: just spray the print surface, and adhesion will be reliable.

Assembly instructions

With just a few simple steps, parents and grandparents can assemble the Lazy Susan. A few clicks, and your new DUPLO turntable is ready to play.

Before finally pressing the DUPLO plate onto the Lazy Susan, make sure that all pins are inserted and can rotate freely. Once the plate is installed, it will be very difficult to remove it again.

Safety Note

This toy contains small parts (pins) that may be dangerous for toddlers.
While the fully assembled model is unlikely to be taken apart by a child, individual pieces could come loose if, for example, the toy is dropped. Please supervise young children during play.

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.