1 / 4
Pendant "Flags of the World" - Czech Republic (without MMU)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Czech Republic flag pendant, from my planned series "Flags of the World".
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
A simple post stylized in the form of the flag of the Czech Republic. The pendant is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command).
The individual colours are printed in sequence:
0.0 - 1.0mm => white
1.0 - 1.6mm => red
1.6 - 2.2mm => blue
2.2 - 2.8mm => black (it is not important if it is only a frame)