Mole windmill v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A clanger for a mole windmill to tap on the ground rod. The noise is supposed to deter moles. It's powered by the windmill. Used some common bolts and 3D printed parts.
The main body will need supports and a brim.
All parts printed in PETG for weather resistance and flexibility.
I redesigned the torsion spring using Fusion 360 to have a larger hub. This was the weak spot on the original.
The mole windmill I used is this one: https://www.lehmans.com/product/mole-chasing-windmill/
Also needed:
M4x6 (clanger),
M4x20 (trip, replaces a screw holding the blades together)
M3x12 (pivot)
M3x12 (connects arm to spring,)
2 self tapping screws