Curtain Rod Hangers - Double Rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mounted curtain rod for holding two 0.75” EMT curtain rods using nails or screws
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Double Curtain Rod Hanger is a sturdy, wall-mounted bracket designed to hold two curtain rods made from standard 0.75" inch EMT electrical conduit — a cost-effective and easily sourced material from most U.S. hardware stores. Ideal for DIY curtain setups that require dual rods (e.g., blackout + sheer) or (eg. blackout + plant hangers), this hanger can be secured with finishing nails or larger screws into a wall stud and leaves minimal damage to wall when removed.
1. Included Files
double_curtain_rod_hanger_left.stl
double_curtain_rod_hanger_right.stl
2. Parts Required
2× 0.75"-inch EMT electrical conduit rods (not included - cut to length)
Note: outside diameter of conduit is 0.992 inches
8-16 small finishing nails (not included)
Nail hole diameter: 0.085 in (~2.16 mm)
(Optional) Wood screws for more secure stud mounting
(Optional) Small Velcro strap to prevent side-to-side movement
3. Print Instructions - Functional High Strength
Layer height: 0.2 mm or 0.3 mm
Infill: 50%+
Perimeters: 6+ outside walls (for added strength)
Supports: Not required
Recommended filament: PLA or PETG (for added durability)
4. Assembly & Usage
Hold bracket in position against the wall or over a stud.
Use finishing nails or screws to secure the hanger through the provided holes.
Lay EMT conduit rods into the two open slots.
(Optional) Use a Velcro strap to prevent the rods from sliding left or right.
5. Design Notes / Variants
Sized precisely for standard 0.75" 3.25-inch EMT conduit — be sure to test fit before final installation.
Designed with simple wall-mount installation in mind.
6. Feedback
I welcome any feedback, suggestions, or remix ideas — feel free to leave a comment or message me if you’d like to see improvements or different versions.
Check out my Printables Club for commercial use and editable versions
For custom design requests, contact me at [email protected].