Rubber Kickstand-shoe and elevator for Escooter Segway Ninebot F3 / F3Pro / MaxG3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 172
- Wydruki
- 2
- Wyświetlenia
- 1031
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!!
With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees. The standsurface is bigger and smoother (softer) for better stand and for no damages at sensitive floors. Simply put it over the Metall-Kickstand -> ready to go.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
70 % Geroid with support insight the hole
Filament: Creality TPU Black
Notes:
Very slow printing. Propably with 45° positioning-printing to print out without inner-support. For stronger and heavier Scooters like the MaxG3, better to reinforce only the standsurface the first 7-10mm height with 85-90%, and the upper material only with 30-40% infill is sufficient.
Category: Gadgets