Kitchen garbage can pedal (Hailo Fußhebel Art. Nr. 3691-00/30) fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix for the built-in trash can, with pedal. Alternative where I can use a standard spring from the e-foot switch...
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
In our kitchen, with the built-in trash can, with pedal, the spring broke. And unfortunately, this does not exist as a spare part.😢
So, removed, measured, Fusion360 started and constructed a little... and the Artillery Sidewinder X1 😍has just built me an interesting alternative where I can use a standard spring from the foot switch...
Bei uns in der Küche, beim eingebauten Mülleimer mit Pedal, ist die Feder kaputtgegangen. Und als Ersatzteil gibt das leider nicht 🥲
Also, ausgebaut, hin und her gemessen und gedreht, Fusion360 gestartet und ein wenig konstruiert… und der Artillery Sidewinder X1 😍hat mir gerade eine interessante Alternative gebaut, wo ich eine Standard-Feder aus dem Fuß-Schalter verwenden kann…
Print time: (with 0.6 Nozzle) - 3 hours
3D printing settings
0.3mm layer height
0.66mm layer width
3 perimeters - 30% infill
Print speed: 35mm/sec
Very easy to print, no supports needed.