Unifi Decora Faceplate to Ring Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted something like dendad51's adapter (https://www.thingiverse.com/thing:1372158) but I wanted it to mount on top…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
I wanted something like dendad51's adapter (https://www.thingiverse.com/thing:1372158) but I wanted it to mount on top of a faceplate and completely cover the decora cutout.
Designed for 6-32 screws and captured nuts. You may need supports for the nut pockets depending on how well your printer does overhangs. I printed mine with hatchbox PETG and it's stupidly overbuilt.
Fusion 360 archives and STL file included for all versions, good luck and have fun.
v2: https://www.thingiverse.com/make:551638
- Aligned the faceplate mount holes with the ring mount holes so the "U" logo on the dome isn't 45 degrees off center.
- Rounds in the faceplate side so that there isn't a visible gap between it and the faceplate.
v1: https://www.thingiverse.com/make:551257
- Works fine (installing is easier), but has some aesthetic issues.
Category: Electronics