1 / 13
LDO Jabberwocky SV08 mount (SV08,SV08 MAX,SV08 ZERO) — zdjęcie 1
1 / 13

LDO Jabberwocky SV08 mount (SV08,SV08 MAX,SV08 ZERO)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

LDO Jabberwocky SV08 mount (SV08,SV08 MAX,SV08 ZERO)

Ocena
5 / 5
Polubienia
44
Pobrania
152
Wydruki
3
Wyświetlenia
1662
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

link to my files im using https://github.com/Val-dose-things/Jabberwocky_files

LDO Jabberwocky SV08 mount (will need feedback for the SV08 MAX and ZERO. I'll make a lever stop shortly. 

the 2.5x8mm screws are used for mounting the lever stop.

all screws are included in the LDO Jabberwocky SV08 kit. please refer to the LDO git hub for details on set up. 

https://github.com/kinematicdigit/Jabberwocky


setting up the tool head follow this guide to update klipper
https://docs.ldomotors.com/en/Toolboard/nitehawk-36#hardware-setuphttps://docs.ldomotors.com/en/Toolboard/nitehawk-36#hardware-setup

i highly suggest being on mainline klipper
https://github.com/Rappetor/Sovol-SV08-Mainlinehttps://github.com/Rappetor/Sovol-SV08-Mainline

follow this for help
https://docs.cartographer3d.com/cartographer-probe/installation-and-setup/before-you-begin

use the latest versions.


added a few configs. 

[quad_gantry_level]          
gantry_corners:              
-60,-10
410,420
points:
  20,5   # Point 1
  20,285  # Point 2
  310,285 # Point 3
  310,5  # Point 4
speed: 500                   
horizontal_move_z: 10     
retry_tolerance: 0.0085
retries: 10                  
max_adjust: 30
[stepper_x]
step_pin: PE2
dir_pin: !PE0
enable_pin: !PE3
rotation_distance: 39.76         
microsteps: 32           
full_steps_per_rotation:200   
endstop_pin: tmc2209_stepper_x: virtual_endstop              
position_min:-15           
position_endstop: 342       
position_max: 342           
homing_speed: 25              
homing_retract_dist: 0        
homing_positive_dir: True    
[stepper_y]
step_pin: PB8
dir_pin: !PB6
enable_pin: !PB9
rotation_distance: 39.80         
microsteps: 32           
full_steps_per_rotation:200   
endstop_pin: tmc2209_stepper_y: virtual_endstop              
position_min: -2              
position_endstop: 362
position_max: 362
homing_speed: 25              
homing_retract_dist: 0        
homing_positive_dir: true
[gcode_macro CUT]
gcode:
    G90
    G1 X0 Y361 F8000
    G1 X-6 Y361 F6000
    G1 X0 Y361 F8000
    G1 X-11 Y361 F6000
    G1 X0 Y361 F8000
    G1 X-11 Y361 F6000
    G1 X0 Y361 F8000
    G90

make sure your cables don't rub. re router them if needed. also don't over tighten your blade holder screws.

Tagi