3D Scanning Marker Pyramid – 3mm Reflective Dots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pyramid holder for 3 mm reflective dots. Keeps markers visible when scanning small objects close to the surface.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 358
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This small pyramid-shaped holder was designed for scanning small objects with reflective markers.
- Fits 3 mm reflective dots (6 mm external diameter) from Revopoint
- Height: 6 mm, with 3 angled faces for optimal marker orientation.
- The angled geometry ensures markers remain visible to the scanner even at low angles, solving the common issue where flat markers placed under the object disappear once the scan reaches table level.
- On the bottom, a 9 × 1 mm neodymium magnet slot allows easy attachment to metallic surfaces.
Compatible with Revopoint scanners (tested) and suitable for any 3D scanner that relies on reflective tracking markers.
Perfect for reliable tracking when scanning small parts close to a surface.
Printed with Add:North Textura Matte Black filament, which gives a nice and non-reflective surface finish. This helps avoid unwanted reflections during scanning and keeps the focus on the reflective markers.