Herrmans bike light mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop-in replacement piece for the mount of some Herrmans bicycle lights, for improved clearance with v-brakes, cables
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Drop-in replacement of the wishbone-shaped piece in the mounting of some Herrmans bicycle lights.
This adds plenty of clearance for cables, muddguards, and V-brakes.
It might not look great, but it works great :D
It's thick for stiffness, avoid PLA as it tends to snap and you don't want that. Works great with PETG in my case.
Design is optimised for easy printing on any FDM printer.
Re-use the hardware from the original mount.
Herrmans h-black MR-4 (some don't come with the wishbone mount)
Herrmans h-black MR-8
Herrmans h-black Pro