Stormtrooper Target Practice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: Stormtrooper.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.16mm
Filaments Used:
#131c23 PLA Geeetech Black Transmission Distance: 0.1
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Hot Pink
At layer #17 (1.44mm) swap to Yellow
At layer #19 (1.6mm) swap to Jade White for the rest.