Wall-mount Gunpla base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stand for displaying 1/144 Gunpla on your wall, anything with a 3mm peg hole.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
A simple stand for displaying 1/144 Gunpla on your wall, anything with a 3mm peg hole. Comes with an adapter for 1/100 kits as well.
This is designed to hang from a standard Command hook, so no need to put holes in your apartment walls. You'll also need a short length of runner, 3mm in diameter, to insert into the hole on the model for a mounting peg.
I've had multiple HG and MG kits on these for several months with no incidents. Infill is less important than layer adhesion - if you're worried, I suggest printing one for a stress test first.
Check out Mecha Gaikotsu's video featuring this design: https://www.youtube.com/watch?v=9zoheTYTAuU