Funnyplaying IPS MGB/DMG Screen Dummy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you need a dummy so that you can test fit your DMG or MGB backlight kit LCD without worrying about damaging the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you need a dummy so that you can test fit your DMG or MGB backlight kit LCD without worrying about damaging the actual LCD? Well, here you go. 3D print this and abuse it to your desires. Do note that a replacement LCD is only like $6 but there is no sense in spending $6 on a replacement LCD when you can just print this for like $0.20 in material and use this to test your cuts without worrying.
Yes the screen image is off center intentionally. That's how it's designed so that everything is centered in the ;console.
I offered measurements for this to someone and, well, here we are. The only measurement not in the picture is the thickness and the LCD is 1.6mm thick.
Category: Electronics