FD3S Armrest Cupholder / phone mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on the 3D printable cupholder for FD3S RX7.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my modifications and take on the 3D printable cupholder. I modified the file found on thingiverse below. This is a work in progress. I plan to make simple fill armrest style as well as further modify the “plug” piece I have designed to accept a magsafe charging puck to make an effective phone mount that is out of the way of the dash and controls. You can use this as is for just a mount (without charging) by simply adding one of the stick on magsafe magnet rings to the flat face of the plug part. Should work for RHD if you mirror it but this is for LHD as is.
I recommend printing with ASA for durrability and UV stability but PETG should also work ok if not in extreme heat and sun alot.
The original model I began with: https://www.thingiverse.com/thing:2736477