1 / 2
Router template for finger joint connection
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Router template for finger joint connections to use with a top bearing flush trim
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (87)Powiązane
Router template for finger joint connections. Gives a very precise and snug fit.
You need:
- a top bearing flush trim (diameter 13.5-14.5mm)
- a wooden board (25 mm thick)
- 7 screws for wood
- two thin boards to prevent tear-out
Addendum: After publication, I noticed that NGL has already released a similar model (Finger Joint Jig).
This version here requires less material and I think it is easier to assemble. However, it is more limited in terms of the diameter of the router bit.