Pill or supplement jar - The Slice -
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small jar to carry around food supplements with some "citrus flair".
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a small jar to carry around food supplements while on the road. I decided to give it some "citrussy flair".
I print the colors on P1P without AMS by using the "manual filament change printer profile", which I included. you can make your own profile if you have a different printer by going to and editing the printer profile - replacing the “filament change G-code - to ”M400 U1" (Gcode for Pause). This lets the printer pause at any filament change in the Gcode. You have to do the unload - load sequence and restart the print.
If you don't want to do this and don't have an AMS, just delete the slices on the bottom. The model should print fine and you still get the contours of the slices.