1 / 3
Fisher Price Training Wheel Hub — zdjęcie 1
1 / 3

Fisher Price Training Wheel Hub

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vintage Fisher Price Little People training wheel hub replacement (1990s–2000s)

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A neighbor asked if I could model and repair a cracked hub for this vintage fisher price toddler bicycle. I believe this is for a ‘Fisher Price Little People 10” Bike Model #8310-65TAR’ produced in the 1990s and early 2000s.

Print settings I used:

  • Material: PC-CF (ASA or PET-G might also be good options)
  • Perimeters: 4
  • Layer height: 0.20mm
  • Print with supports everywhere
  • Orient with the wheel laying down (as a “pancake”). Probably best to do the opposite of what I did and orient the outer face of the wheel upward for better surface finish 

After cutting off the rivet, I remounted with a 5/16" 1.5" stainless steel bolt, two stainless steel washers, and a stainless steel nylon lock bolt. Works great!

The featured photo is my replacement part. The other two photos are photos of the original injection-molded part.

Tagi