GBxCart RW v1.3a (USB C) Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My housing for my GBxCart RW v1.3a (with USB Type C port): https://shop.insidegadgets.com/product/gbxcart-rw/ Case…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My housing for my GBxCart RW v1.3a (with USB Type C port): https://shop.insidegadgets.com/product/gbxcart-rw/
Case might fit other variants but I don't know enough to be sure. I believe it should fit all variations of the 1.3 hardware (except the "Pro" variant) but the micro USB version will have a gap around the port as a USB type C port is physically larger than a micro USB port.
I printed the bottom housing as-is and the top housing upside-down. The bottom housing just snaps on to the circuit board but the top housing I attached with hot-glue. I just used three globs on the bare spots of the PCB (and not on any components!).
Depending on your nozzle size, print at 0.1 or 0.2 mm height. Any larger or any size inbetween might mess up the fit and require customization. Initial layer can be anything if the bottom is printed rightside-up and if the top is printed upside-down.
Add labels as you like, I made no pre-labeled version this time.
Need a case for GBxCart RW v1.2? See here: https://www.prusaprinters.org/prints/141232-gbxcart-rw-v12b-case
Per the license, you are free to use for any personal devices. If you modify it, please post that too. Anyone may use this unless your name is "Icesythe7" (or "Lucas Loveless" as he has corrected me before).
Category: Electronics