Supermarket Trolley Self-Scanner Holder for Right-Handed People (or for left-handed on right-handed trolleys!) V2 FOR TPU BAR CLIP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those with TPU, this is a much improved version with little chance the bar clip will break. PLA+ was problematic.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got fed up with reprinting this model every few months when the bar clip broke! I tried a couple of adjustments to the shape but ulimately PLA (even the PLA+ which I use) is just a bit too brittle to handle deformation to place and remove the bar clip and have enough wrap to stop it lifting off when using the supermarket scanner.
So I redesigned the holder and bar clip to use a TPU bar clip (handle is still fine in PLA/PLA+/whatever you like)
The Lock Stub's attachment to the holder is unchanged - see original model for the bolt and nut info. However I have updated the Stub length to accommodate more trolley designs so the latest Stub is in THIS model's STLs.
I've also updated the main holder to accommodate more trolley designs, and the latest Holder is in THIS model's STLs.
PRINTING
TPU bar clip - I used all normal TPU settings for this, 0.4mm nozzle, 0.2mm layers, no support or adhesion, normal speeds.
HANDLE - all normal PLA settings, 0.4mm nozzle, 0.2mm layers, no support or adhesion, normal speeds.
ASSEMBLY - see original model for nut/bolt and lock stub. Shove the TPU bar clip onto the plain side of the holder with the copyright logo facing the same way as the bar clip hooks.
Enjoy :o)
Please Like this model if you find it useful.
If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)