1 / 3
Pendant "Flags of the World" - Netherlands (without MMU) — zdjęcie 1
1 / 3

Pendant "Flags of the World" - Netherlands (without MMU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,30 € – 0,37 € netto (bez VAT)

Dla pliku: pendant_4color_0.2mm_PLA_MINI_21m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,33 € netto (środek widełek).

Masa podana przez autora
4 g
Czas druku podany przez autora
20,4 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Flag pendant of the Netherlands, from my planned series "Flags of the World".

Ocena
5 / 5
Polubienia
6
Pobrania
32
Wydruki
1
Wyświetlenia
194
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A simple post stylized in the form of the flag of the Netherlands. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command).

The individual colours are printed in sequence: 
0.0 - 0.8mm => red
0.8 - 1.4mm => blue
1.4 - 2.0mm => white
2.0 - 2.6mm => black (it is not important if it is only a frame)
 

Tagi