1 / 3
Toolholder PRUSA XL - Honeycomb & Hanger | REMIX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rounded the edges & added a Honeycomb pattern & the hanger remix!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Toolholder PRUSA XL - Honeycomb & hanger | REMIX
Added a Honeycomb pattern & the hanger remix! The remix is about 5 mm wider, also the edges are rounded a bit! (The grey one is the original.)

