1 / 1
Teapot Skull Keychain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice keychain to print in two colours with printers with or without multicolour
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Technical information:
- Nozzle size: 0.4 mm
- Layer height: 0.2 mm
- Infill : 15%
- Material: PLA
- Supports: no needed
- Color: Red and White
- Filament Brand: Winkle
How to print with printers without multicolour:
- Calibrate your z-offset for best quality.
- Place the model with the design to the bed. (Disable the touch sensor at the beginning of the print or place the model where it does not make the check)
- Save the 3MF file and make 2 copies, one for each colour.
- Open the “red copy”, split the model into parts and print the red layer without moving the coordinates of the model.
- Change the filament to the 2nd colour.
- Clean any filament string and make a home if necessary but do not move the bed plate.
- Open the “white copy”, split the model into parts and print the rest without moving the coordinates of the model.
- If you want the keychain to be 2 faced, mirror the model, repeat the process and glue them later.