Marble Kit V (Elevator set)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
Warning: This project is in the testing phase and may undergo changes. Any feedback that helps the project move forward will be appreciated.
This project is an extension of the Marble Kit V project: https://www.printables.com/model/1357470-marble-kit-v
Information
The aim of this project is to create a closed marble run. As it is a modular project, I had to create a modular lifting system. With this chain lifting system, you can make it as high as you want.
The project is currently under development. The ultimate goal of the project is to attach a motor to the chain so that it is no longer manual.
Model parts
Chain
Pieces that allow the marbles to climb. It is recommended to print at 100% fill for greater durability.
Elevator base
Where the marbles enter the elevator.
Elevator top
Where the marbles come out of the elevator
Wheel
Wheel that allows the chains to move. Print 2
Axis
Connect the wheel to the lever. Print 2
Lever
Where the elevator is operated. Print 2
Assembly
Base
Place the wheel in the middle in the correct orientation, then insert the axle and finally attach the lever.
Top
Place the wheel in the middle in the correct orientation, then insert t
he axle and finally attach the lever.
Chain
Press each link onto the previous one. Then pass the chain through the lifter and join the two ends.
