Gridfinity bin for JRready Extraction Tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handy display bin for handy extraction tools
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This extraction tool set came in a pouch. But I wanted to store them in Gridfinity. So here's a bin. I hope you'll find it useful.
The bin is 3 by 3 by 3 grid units. It has magnet and screw holes on the bottom. It's stackable. It has finger cutouts and chamfers around the tool outlines for easy insertion and removal.
I designed this in Fusion 360. I've included the CAD files in .f3z and .STEP formats to make remixing easy.
Link to the tool set. https://www.amazon.com/dp/B0B6FMZMH4
Printing Instructions
The model is optimized for 0.2mm layer height. You can change that in the Fusion 360 CAD file, if you want. To avoid a warning from PrusaSlicer, I recommend adding a height range modifier from 4.8 to 5.2mm and setting the bridging angle to 45°, just within that height range.