Magnetic hanging loop for dishwashing brush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple attachment loop for dishwashing brush or similar, with integrated 6X3 magnet.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A simple attachment loop for dishwashing brush or similar, with integrated 6X3 magnet. Magnet attachment ensures that even if someone were to tug the bursh hanging from this forcefully, the loop will not break but just pulls away from the surface it is attached on.
I printed this with 0,15mm Prusa BALANCED profile.
PETG is a good choise as this has to be printed straight, bottom with magnet against the bed.
Make a pause after the cavity and insert magnet. Beware, tolerance for the magnet is very tight so please have your printer on it's best behavior :)