TercelPod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gew6QDP7pAX This gauge pod is for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gew6QDP7pAX
This gauge pod is for use in a 5th generation Toyota Tercel. May fit other generations/models. (Mine is a 1998. Please ignore the crap-tastic windshield.)
Designed to replace the clock in the centre of the dashboard, and hold a 52mm guage. I am using it to hold a small tachometer. The center hole can be enlarged to hold up to a 76mm (3" gauge if desired.
I made an error for the one that I printed in the photo, the gauge hole is sitting below centre. I originally sized it for a larger gauge, but I had a 52mm/2" tachometer sitting on the bench in my garage, and decided that it was good enough.
Oct 31, 2018: Added a dual pod version, but I have not yet printed/tested this, so should be treated as beta at best. This reduces to 2 screws holding the pod together.
Print Settings
Printer:
Lead Screw
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40%
Filament:
iPrint3D PETg
Black
Notes:
3 solid layers top/bottom. For PET, I use honeycomb infill.
Category: Automotive