Bokeh Filter Holder for 52mm Lens Filter Thread
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took a bokeh filter holder and a 52mm lens filter thread and mashed them together in Tinkercad so that I wouldn't…
- Ocena
- 4,5 / 5
- Polubienia
- 24
- Pobrania
- 147
- Wydruki
- 2
- Wyświetlenia
- 914
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
I took a bokeh filter holder and a 52mm lens filter thread and mashed them together in Tinkercad so that I wouldn't need to buy a lens filter.
Use the bokeh filters from the "Bokeh Filter With Some Covers" by MrEsuba thing that I remixed.
I made some of my own bokeh filters using Inkscape and Blender, I might add more in the future.
I used matte black filament to prevent weird light reflections.
It was pretty easy to print, I used a 0.1mm layer height to give the threads the best chance I could, and a raft. It took around 2 hours on my Ender 3.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
15%
Filament: Hatchbox PLA Matte Black Post-Printing =============
After printing and cleanup, it should be able to screw on to a 52mm lens filter thread.
The printed threads might be a little sticky, but after a few uses they should wear down and be smooth.
Please leave a comment if you printed this or have suggestions!
Get me some tea BuyMeATea.com
Category: 3D Printing