1 / 59

i3 Frame Mounting System - Major Mod to i3 / Duplicator Style

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ChevyMonster

@ChevyMonster_225067

Complete Frame Mounting System for the i3 / Duplicator style of 3d printer.

Ocena: 0 / 5
Polubienia: 0
Pobrania: 14
Wydruki: 0
Wyświetlenia: 228
Oceny: 0

Aktualizacja u źródła: 12 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: Other Printer Parts & Upgrades
Licencja: Creative Commons — Attribution

Szczegóły Pliki (53)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)

Complete Frame Mounting System for the i3 / Duplicator style of 3d printer.

There is no drilling required. It eliminates the separate power box and the wiring umbilical cord.

It improves the frame rigidness considerably. It adds 60 mm clearance at the top of the frame, so the hot end can print to the full 180 mm without hitting.

It eliminates the drag chain from the right Z-axis motor to the X axis mount above. It adds a drag chain to the hotbed, to reduce strain on the wiring.

It has an adjustable z-axis switch mount and plunger.

The first picture is the finished project. The next four pictures show the range of motion for the hot end carriage.

This mod has 56 parts, so far. It requires a lot of 3 mm bolts from 12 mm up to 20 mm in thread length, (2) 4 mm bolts that are 20 mm long, and (2) 2 mm bolts that are 12 mm long.

Assembly Photo Galleries

00 Frame System Overview - http://imgur.com/a/nDK15

01 Frame - http://imgur.com/a/VXT2c

02 X Carriage - http://imgur.com/a/Ikf8r

03 Y Chain - http://imgur.com/a/yu7JE

04 Power Box - http://imgur.com/a/7LEG1

05 Z Switch - http://imgur.com/a/DbQLO

06 Ramps - http://imgur.com/a/Qh0aK

07 Mosfet - http://imgur.com/a/15lTv

08 Display - http://imgur.com/a/Y1FdS

09 Fans - http://imgur.com/a/magFJ

10 Power Plug Mount - working on it <<<<<