1 / 1
Cycling race timing card seat stay mount — zdjęcie 1

Cycling race timing card seat stay mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Whipped up this model so the timing card could be mounted more securely. Enjoy, and any comments welcome

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
122
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Made this as I did not receive a mounting bracket with my recent race's timing card.  
 

My Topeak saddle bag takes up most all of the seat post and I had little room left on the seat stay piping below, so I made the pipe rounding narrow.

Would like any feedback if you find this useful, I know I did.

Use two cable ties to secure through the timing chip card's slotted holes and onto the seat stay pipe - Will fit nicely on a 32mm diameter pipe.

It's a short print, so print in anything you have, although UV resistance could help.

Tagi