AutoDarts WLED & COB LED light enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure to allow a protective home for your WLED electrinics and easy light switching
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Model I made to house my WLED ESP32 + level shifter electronics as well as a switch for turning on the light ring COB led.
Hope you comment if you find it useful!
Option to print in multi-material to show the lettering more clearly, but this wastes some material, naturally.
Design principles / criteria I had in mind:
- The enclusore had to be mountable on my back-board
- It had to have an integrated way to mount DC power barrel terminal connectors - One for 12V feed (COB LED ring strip) and one for the 5V feed (WLED and effects strip)
- It had to allow for two toggle single pole double throw switches, for each feed
- It had to have an option for Voron style heat set inserts for lid closude (mine friction fits perfectly though)
- It had to allow for a custom project board fit as I did not have a fancy custom PCB made :-)
Pro tip: The DC power female connectors fit nice a tight, so you will have to cut a small bottom corner off both sides of the connector to fit by rotating it in. See the picture showing the incision.