1 / 7
HSW - Holder for turbo fan Fiizreal X50 — zdjęcie 1
1 / 7

HSW - Holder for turbo fan Fiizreal X50

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fiizreal X50 holder with vacuum accessories mounts

Ocena
5 / 5
Polubienia
5
Pobrania
46
Wydruki
2
Wyświetlenia
352
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Intro
This model is easy to print, fits nicely, all is snug fit +/- 0.2mm so make sure you got your tolerances right. Should work for other fans as long as they are the same size range (28.2 x 48.2 mm). There is a space for a vacuum head nozzle on the bottom, and space for inserting spare nozzle and vaccum itself. All of it is decorated in honeycomb pattern with filleted edges to make it look sharp.

My design is based on this guy's work: printables.com/model/1086269-hsw-x3-turbo-fan

Feel free to leave a make or ask for improvements 👌😊

Print settings
Printed this on SV06 with 0.4mm nozzle.

Material: PLA

Perimeters: 2-3

Layer height: 0.28mm or 0.2mm for finer details

Infill: 15-20%

Supports: No

Tagi