FlyFive33 Switchback Custom TPU parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU parts of my own design for the FlyFive33 Switchback frame Fixed 45deg cam mount - holds a Foxeer nano 1.8 lens or…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
TPU parts of my own design for the FlyFive33 Switchback frame
Fixed 45deg cam mount - holds a Foxeer nano 1.8 lens or similar without screws
New flipstick with hook under top plate
Two-piece vtx antenna bulkhead (tbs screw-on type) mount
-- one design for aikon 35A, one for hobbywing 40A. Print with slanted antenna mount face on bed.
Rx antenna tubes (use standard rc 1/8" tubing)
Spacer for under ESC (prevent shorts!)
Spacer for ESC to Tiny's LEDs Unity F7
Stretchy topper to hold down VTX antenna snap connection
New: Foxeer nano 1.7 lens 45 degree mount
Also New: Flip stick v3! stronger yet flexy design. print with back face on bed, no support
added 50, 55, 60 degree pods for you guys that like to look at clouds
Use a brim on the cam mount.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
Yes
Resolution:
0.2
Filament:
YOYI TPU
Notes:
Use support under flipstick and a little bit around the camera mount
Category: R/C Vehicles