Versatile Filament Rewinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact, sturdy, modular filament rewinder with 1:3 gearing for fast respooling and add-on compatibility.
- Ocena
- 4,833 / 5
- Polubienia
- 689
- Pobrania
- 2173
- Wydruki
- 11
- Wyświetlenia
- 12 359
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introducing a newly designed filament rewinder with virtually endless expansion possibilities.
Main Features:
Modular design for easy customization
Sturdy and compact construction
Minimal extra parts required: 7 × 608 bearings, 2 × 3 mm screws (15mm), 4 × nuts, 2 × washers, 1 x bowden tube piece
All moving parts use 608 bearings
Uniform bearing installation: same snap-in mechanism with varying bracket strengths
3D printer–friendly
Critical parts can be printed horizontally for better strength (e.g., axles, bearing brackets)
Easy assembly and disassembly via sliding, screwing, and snapping
Exchangeable snap-in feeders to accommodate different spool widths
Attachable add-ons available or planned: source spool holder for various sizes, power drill adapter, motor, filament cleaner, spool brake, run-out switch, etc.
Compatible with multiple filaments: PETG (recommended), PLA, ABS, and more
Smooth feeder direction changes without cut teeth
Ratchet mechanism for the crank
1:3 gear ratio for faster respooling
Dummy add-on can be used to hold the respooler in the basic configuration while cranking
All basic spooler parts are included in the file Spooler.3mf and are ready to be printed. You can reposition the items to suit your color preferences. Supports are only required for the feeder case and the main crank part.
Assembly should be straightforward by following the reference pictures. Use the 0.4 brackets for the spool holder, the 1.0 brackets for the other bearings. You can assemble all the axles outside the frame and then snap them into the bearing brackets. To attach the feeder assembly to the frame, insert the outer edge beneath the frame’s lip first, then rotate it into place.
Note: All screws are oriented normally, with one exception: the feeder gears must be assembled counter-clockwise.
Add-ons will be published separately.
https://www.printables.com/model/1417869-spool-holder-for-versatile-filament-rewinder
https://www.printables.com/model/1417878-power-drill-adapter-for-versatile-filament-rewinde
https://www.printables.com/model/1417909-motor-for-versatile-filament-rewinder
https://www.printables.com/model/1446552-plug-in-feeder-for-versatile-filament-rewinder
https://www.printables.com/model/1459503-big-spool-holder-for-versatile-filament-rewinder
https://www.printables.com/model/1459513-filament-guide-for-versatile-filament-rewinder