1 / 4
Coffee ground knockbox for portafilters V2/ Abklopfbehälter für Siebträger (Espresso) V2 — zdjęcie 1
1 / 4

Coffee ground knockbox for portafilters V2/ Abklopfbehälter für Siebträger (Espresso) V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My solution of a coffee ground knockbox for portafilters. I wanted to make a container that fits my style. improved V2.

Ocena
4,5 / 5
Polubienia
55
Pobrania
295
Wydruki
0
Wyświetlenia
1127
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A three-part tapping station for portafilter machines, it's an improved Version of my first attempt. The concept is that the outer box is lifted with the bar, the full coffee grounds container can now be picked up. Now you can either empty it directly or replace it with a second empty container. At the bottom there's another small container that has some ventilation slots on both sides. The coffee grounds container has a built-in sieve which allows air to flow through the ventilation slots and the sieve, ensuring the moist coffee grounds can dry properly and mold is being prevented. You can print each single part in every color you want.
In my design, wooden sticks with a diameter of 14 mm (0.552 inches) were used. This is simply pushed through and can also be exchanged / customized, for example a thin metal tube or a rod with a rubber coating. Of course you can also just glue the rod in place.

Let your creativity run wild!
Remixes are welcome.

Tagi