Philips OneBlade Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This stand for the Philips One Blade features a holder for the main unit, two additional shaving heads and attachments.
- Ocena
- 5 / 5
- Polubienia
- 159
- Pobrania
- 566
- Wydruki
- 3
- Wyświetlenia
- 2290
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
OneBlade Stand
This stand for the original Philips OneBlade features a place to put the main unit, two additional shaving heads and two attachments.
The underside has four cutouts to add rubber feet with a diameter of 6mm and a thickness of 2mm. (7mm diameter is also possible and 2mm thickness would be the minimum)
It is recommended to print the model with a global 25% infill and a 50% infill for the lower 10mm to increase its mass and prevent it from unwanted movement. - You may experience warping with this higher infill, thus a Brim could be helpful.