Tentacles Cards Book Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tantacles themed playing/collection cards case that closes on itself like a book
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
A playing/collection cards case that closes on itself like a book.
Made to hold a deck of 25/30 collection cards (with 66x91mm Ultra Pro sleeves).
Print-in-place design (no assembly required).
No excessive overhangs (max. 35° on conical hinge pins and max. 45° hinge knuckles).
Easy multi-color printing with a minimum number of filament swaps.
Optional magnet holds (recommanded if you plan to store the case vertically).
Last-card cutout, picker aid.
Cover lid to prevent the first card from slipping out too easily.
Themed version
This version is themed with tentacles all over the cover.
For a blank or other themed versions, please check the original model.
The original model was used with the parameters below:
card_width: 66 mm
card_height: 91 mm
deck_height: 20 mm
The artwork has been AI-generated and vectorized using potrace.
The illustrations are made to be printed using an AMS.
For best results, please use the Arachne wall generator on your slicer.
Magnets
The model includes two magnet holes to help keep the case closed:
Cover: Ø 3 mm x 1 mm
Case: Ø 3 mm x 2 mm