Pocket Hive Tiles Boardgame + Box No AMS needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was feeling too lazy to swap filament colors, so I designed these Hive tiles to be printed all in one color.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
Description
Hive Board Game Tiles + all DLC
I was too lazy to swap filament colors, so I designed these Hive tiles to be printed in a single color. No need to change filament—just print and play!
If anyone needs the Fusion 360 file, just leave a comment :D
This is ½ of a full Pocket Hive set. It’s designed for two-color printing—just print it twice with reversed colors to get the complete set.
The tiles match the original Pocket Hive dimensions (25 mm across flats, 9.6 mm thick).
I also made a remix storage box with magnets. I adapted the lid design from G__W__ on MakerWorld and turned it into a magnetic box. The box measures 76.1 mm across flats for a snug fit and is 40 mm high.
⚠ Note: The magnet holes are designed for 7.8 mm diameter magnets. Be careful and adjust the size to fit your own magnets.