1 / 5
Monitor camcorder/camera mount — zdjęcie 1
1 / 5

Monitor camcorder/camera mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to use my cheap Panasonic camcorder as a webcam for video conferencing, since it has much better image…

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

I wanted to use my cheap Panasonic camcorder as a webcam for video conferencing, since it has much better image quality than any of my webcams. So I made this mounting adapter, which works with the tripod head from a cheap Gorillapod clone (mine is specifically the Sunpak Flexpod, available at https://amzn.to/39v76Yk), and is designed to fit my LG 27UK500 monitor.

Print Settings

Printer:

Artillery Genius

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

100%

Filament:

Hatchbox PLA


Notes:

Unless you have the same/similar monitor as me, you'll want to edit the .scad file, and enable the "// test fitter" section and disable the "// mounting plate" and "// body" sections, then generate the .stl and print it to see how well the bracket profile fits your monitor. Edit the coordinates in the monitor_profile() polygon accordingly, and then iterate until you have a fit piece that fits on your monitor. Then disable the test fitter and reenable mounting plate and body, and then print that out.

Post-Printing

You can optionally put some 3/8" steel bearings into the tubes as additional counterweight.

I used CA glue to attach the mounting plate to the body, but you can probably also weld it with a filament pen or heat gun or the like.

Category: Camera

Tagi