Spare support leg for Rummikub - easier print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spart part support leg for a Rummikub game, that is easier printable
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
I remixed the model https://www.printables.com/model/197954-spare-support-leg-for-rummikub-tile-board because printing the sticks upright is a little bit tricky.
Additionally, the feets in the original model resulted in a fit that use a little bit to tight. In my version the fit is a little bit loose … XD this obviously needs some tuning, but it works either way.
The problem
Rummikub - “Spiel des Jahres” / Game of they year 1980 - has some nice stands for the tiles. Unfortunately the feet get lost over time. Therefore this is a spare part or replacement for this game.
Modelling
The part is modelled in FreeCad to support the four-head for the plate. It has also a flat side to be printed on directly without support.
Print instructions
Nothing special ;)
Tested good: regular black PLA.
Modifications welcome
You'll find the FreeCad file attached.