death star panel skin for duality led track system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of skin files for Andy Huot's excellent led track system that recreate the panels from the death star
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I was really impressed when I came across the duality led track system so I purchased the models for it. I really wanted something death star themed so i used the blanks in his skins package to model up something.
Simply start in some sort of clear filament, I used overture clear petg. Then do a filament/extruder change at .6mm to black. I used prusament jet black petg. For best effect print the track base pieces in black also. I just started printing these but when I have things put together and installed I'll post additional pictures.
I will model more pieces as I need them. The place I'm putting these has varied layout because of air conditioning ducting so I'm sure I'll end up needing most of the pieces, the 90 degree turns in particular.
09/14/2025
Added skin_cross_150_seamless_deathstar.stl
Added skin_tee_150_seamless_deathstar.stl
Added skin_45_150_seamless_deathstar.stl
Added skin_90_150_seamless_deathstar.stl
Added skin_90_250_seamless_deathstar.stl
09/16/2025
Still printing all the parts, but I attached a screenshot showing what it looks like with an led strip running through it.
Added skin_up_45_100_seamless_deathstar.stl
Added skin_up_90_100_seamless_deathstar.stl
Added skin_down_45_100_seamless_deathstar.stl
Added skin_down_90_100_seamless_deathstar.stl
09/21/2025
As I started assembling this myself I noticed the corner pieces are not perfectly seamless. I have added _r2 versions of several parts that should more easily line up.
09/24/2025
I got a lot of the track printed and I put some of the non-seam pieces I had already printed up to give a better idea of what it looks like. I'm completely circling our fitness room so I'm going to have to make some custom pieces to fully contour the room. it's an odd shape with AC ducting. I've attached another pic.
11/02/2025
Added
skin_straight_100_seamless_deathstar_r2.stl
11/03/205
I finished this project! finally! I have added some pictures of the final result. Some of our walls are not perfectly square(90deg) so it's not perfect, but it's good enough.